|
精益求精： 采用高品质进口零部件，优化无止境。
质量保证： 合理的生产布局，将质量控制在各个阶段。
应变性强： 满足市场对交货期越来越短的需求。
至诚服务： 全面提供完善的售前与售后服务。
客户至上： 为各行各业的用户迈向成功保驾护航。
优质高效： 大规模批量生产配以完善的产业链，达到最高性价比。
锁模单元
- 5点式斜排双曲肘与无托板式尾板设计
- 机械,电气安全连锁保护
- 低压模具保护装置
- 数控4段开模压力、速度、位置控制
- 多种液压顶出模式
- 强化处理动模板移动耐磨轨道
- 模具冷却水分流器
- 中子装置预留1组
- 自动集中润滑系统
- 快速合模差动装置
- 可调节式动模板支撑结构
- 液压油马达驱动齿轮调模
- 拉杆特殊工艺处理、强度可靠
- 开关模、顶出位置尺控制
- 自动调模功能
注射单元
- 双缸平衡注射系统
- 双缸座台进移（≥2500KN）
- 注射速度、压力、位置4段设定
- 保压速度、压力、位置3段设定
- 储料速度、压力、位置2段设定
- 注射转保压起点控制
- 注射位置监测功能
- 注射位置尺控制
- 螺杆冷启动（防止）功能
- 射出防护罩
- 3种模式座退选择功能
- 自动清料功能
- 防滑铝花纹盖板
- 高扭力油马达驱动螺杆预塑装置
- 螺杆倒索防流延装置
- 料筒温度通过电脑PID控制
- 陶瓷料筒加热装置（≥3000KN）
- 料筒下料口冷却系统
- 储料背压调节功能
- 料筒加热防护罩
- 料筒自动加热功能
- 喷嘴对中微调装置
液压单元
- 低噪音变量泵系统
- 油温偏差报警功能
- 油箱液位计
- 油箱滤芯阻塞报警功能（≥3000KN）
- 液压油冷却装置
- 自封式油箱滤油器（≥2500KN）
电控单元
友好的人机交互界面，实时监测生产过程，并可显示各种故障诊断（不同机型，面板配置略有不同）。
Keep improving: Highly accurate imported machine components have realized the optimization.
Quality assured: Logical layout controls the quality at each stage of production.
High flexibility: Satisfy the shorter delivery time of the market.
First-class service: Accessible pre-sales and after sales service.
Uppermost customer: Try our best to support the customers.
High quality & efficiency: Mass production with perfect industry chain, achieving the highest priceperformance ratio.
Clamping unit
- 5-point double toggle system
- Mechanical and electrical safety gate interlock
- Low pressure mold protection
- Multi stage control of pressure, speed and position of mold open/close
- Variable mode of ejector movement
- Wear-resistant track of moveable platen
- Cooling water manifold for mold cooling
- 1 pair of hydraulic core puller is optional
- Automatic central lubrication
- Fast mold clamping with differential device
- Braking device for mold protection
- Automatic mold height adjustment
- Chrome plated tie bar
- Controlled mold opening and clamping by stroke sensor
- Controlled ejector by stroke sensor
Injection unit
- Two drive cylinder for the stroke of injection unit
- Two drive cylinder for screw injection (no less than 2500KN)
- Multi-stage installation of injection speed, pressure and position
- Multi-stage installation of holding pressure, time and speed
- Multi-stage installation of charging speed, time and position
- Adjusted back pressure during charging
- Automatic barrel heating function
- Controlled transfer position of injection to holding pressure
- Monitored ending position of injection
- Controlled injection process by stroke sensor
- Prevented screw movement before full plasticizing
- Nozzle protecting cover
- Anti-slid barrel aluminum cover
- Three retraction modes of injection unit
- Self purging function
- Efficient plasticizing device with strong torque motor
- Free selection of variable screw sizes depending on application
- Controlled temperature of barrel by PID
- Ceramic heater bands (above 3000KN)
- Cooling device at the feeding throat
- Nozzle alignment adjusting device
Hydraulic
- Efficient and noise reduced variable hydraulic pump
- Stable and powerful fixed hydraulic pump
- Oil tank with level control
- Oil temperature alarm
- Oil pre-heated function
- Alarm in case of filer clogged(above 3000KN)
- Oil cooling device controlled by valve
ECU
Ultra bright screen technology to provide cycle and control system information for the user and machine
maintenance (Note: The machine types with different clamping force may be equipped with different controllers). |
