|
海天天隆系列是天翔系列的革新与升级，具有节能环保等特征。特殊的机器设计保证了最大限度的节水节电，在明显提高生产效率的同时，制品精度也得以提升。海天天隆系列是对传统液压机的革命，成功地填补了传统液压机与全电动机器之间的空白。
创新： 全新伺服驱动理念
稳定： 全闭环控制
经济: 与传统液压机相比，节能率达到20-80%
人性化: 控制面板采用LCD 彩色大屏幕，实时监测生产进程，并显示各种故障诊断最新易操作专用注塑机电脑控制系统，响应周期更快。
快速: 永磁交流伺服电机仅需0.05秒即可达到最大输出量。
安静:整机处于低噪音运行状态，在低速运行时，效果更为明显。
革命性的驱动系统
海天天隆系列配备旋转编码器与压力传感器，分别对流量与压力进行监控与反馈，依据反馈信息，高性能同步伺服电机通过改变转速和扭矩对流量与压力进行相应调整，从而确保产品质量与精度。
响应快速、性能稳定的海天天隆系列的动力控制其同，配备了精度高、反应灵敏的压力反馈装置，形成高精密闭环控制，有效保证了生产织品的稳定性与重复度。
响应快速的伺服电机:
驱动系统响应灵敏迅速，仅需0.05秒即可达到最大输出量，响应速度远快于传统注塑机驱动系统，从而显著地缩短了成型周期，生产效率得到大幅度提高。海天天隆系列采用了KEBA（奥地利）先进的控制技术。KEBA-1075 型适用于标准塑料制品生产需求，KEBA-4030 型满足复杂注塑成型需求。
电控单元
» 工艺参数预设置
» 机械手接口
» 参数资料保护锁
» 料筒温度偏差自我校正
» 系统油温警示装置
» 电脑内部多组塑料成型参数记忆
» 高精度位移传感系统
» 外围电线的集成采用摩尔管
» 彩色LCD显示屏
» 异常报警功能
» 外供3组插头插座
» 前后门紧急停止按钮
» 实时监测显示各动作运作情况
» 电机安全保护装置
» 系统硬件I/O检测功能
» 下料光电开关
Based on the Haitian Saturn Series, the Haitian Mars Series is characterized with energy efficiency and environment protection. This machine range will raise your molding operation to the next level of efficiency and precision. Its unique design provides energy and water saving functions for standard injection molding machines. The Haitian Mars Series closes the gap between fully hydraulic and fully electrical machines.
Innovative: New servo drive concept
Stable: Complete closed-loop control
Economize: 20-80% less energy consumption compared to conventional hydraulic machines
Userfriendly: Latest control technology from KEBA
Fast: Dynamic AC-servomotor with a response time of only 0.05 sec.
Quiet: Lower noise levels, particularly in low speed applications
The innovative drive system
Equipped with a rotary encoder and a pressure sensor, the pressure flow state will be transmitted to the controller, the command of which will be sent out to the efficient synchronous servomotor to change the rotation and the torque accordingly. The corresponding flow and pressure adjustment ensures the highest quality and precision of the plastic parts produced.
With quick response and steady capability, servo gear shift dynamical control system has equipped with pressure feedback device with high precision and sensitivity, which forms a close-loop precision control and provide products with high stability for customers.
Quick response of the servo motor
The response time of the drive system is very fast. It requires only 0.05 sec. to reach the maximum power output. Cycle time is substantially shortened comparing with the plastic parts production by traditional hydraulic injection molding machines.
The efficiency is improved significantly. |
